Dimethylamine is a secondary alkylamine and co-produced with monomethylamine (MMA) and trimethylamine (TMA). It is a versatile building block and used to produce wide range of important chemicals applicable in such as solvents, pharmaceuticals, agrochemicals, flocculents, surfactants, rubber chemicals, PU catalysts etc. E.g., Dimethylformamide (DMF..

Jana is one of the leading producers of high molecular weight resins meeting the requirements of the FDA and European legislation for Can and Coil coatings required for food contact. These resins, some with a history of safe use in human health applications exceeding 50 years, continue to be far safer than many alternative technologies offered whic..

Melamine Urea Formaldehyde Resins are poly-condensation products of the reaction of formaldehyde with urea and melamine. These resins have higher water and weather resistance and therefore are suitable for the production of panels for exterior use or in conditions of high humidity. These resins provide panels with superior properties and this compe..

that touch our daily lives, such as building materials, foams, resins, plastics, paints, polyester and a variety of health and pharmaceutical products.Methanol also is a clean-burning, biodegradable fuel. The largest scale applications in terms of volume are processing into formaldehyde, which is further treated to form resins, glues and various pl..

Monomethylamine is a basic alkylamine and the simplest primary amine. It is a colorless gas. It is co-produced with dimethylamine (DMA) and trimethylamine (TMA). It has a strong ammoniacal or fishy odor. Monomethylamine is used as a building block for the synthesis of many other commercial compounds. Generally, it is sold as an anhydrous gas in pre..

Paraformaldehyde is a polymer form of formaldehyde. It can be used for the same applications as aqueous formaldehyde solutions. The main advantage of using Paraformaldehyde is that, it can be converted to varied concentrations of formaldehyde as per the requirement like higher concentration in the manufacture of resins with high solids content. It ..

Pentaerythritol - PentaPentaerythritol (Penta-Mono grade) is a white crystalline powder. It is a synthetic polyhydric alcohol containing four primary hydroxyl groups (tetra functional compound). It provides the outstanding properties due to the nature of compact structure and high density of hydroxyl groups.Pentaerythritol is used in production of ..

Sodium Formate is the sodium salt of formic acid. There are various production methods to produce it. At our facility, it is produced as by product during the production of Pentaerythritol. It is a white crystalline powder. It can be used as final product, as raw material or as intermediate to produce other chemicals.MAJOR APPLICATIONSLeather indus..

Sulphonated Naphthalene Formaldehyde is a condensed polymer product. It is mainly used as powerful water reducing agent in concrete and also known as superplasticizer. It produces concrete with exceptionally workable characteristic referred to as high slump. It helps to keep the minimum water to cement ratio without compromising the degree of worka..

Trimethylamine is tertiary alkylamine and co-produced with monomethylamine (MMA) and dimethylamine (DMA). It is used as raw material for the production of choline based pharmaceuticals, surfactants, solvents, ion-exchange resins etc. E.g., Choline chloride, Chlormequat chloride, Trimethylamine Hydrochloride (TMAHCL) etc.MAJOR APPLICATIONS Anim..

Urea formaldehyde concentrate is a clear and viscous liquid that contains mainly formaldehyde and urea with 60% and 25% content respectively while the rest 15% is water. Urea formaldehyde concentrate carries highest percentage of formaldehyde in liquid form.It is widely used as an anti-caking agent for the urea fertilizer to avoid lump formation of..

Urea Formaldehyde Resin is one of the important thermosetting amino resins produced by urea and formaldehyde in various grades depending on the end uses. It is preferred due to its high reactivity and good performance in the production of end product and comparatively low price. It is used in manufacture of adhesives, finishes, molded objects, as g..